Protect Employees From Eye Hazards
by: sas_abbsafetynet |
Total views: 2 |
Word Count: 425 |
View PDF | Print View
Share This Article
Policies and procedures need to be written to outline the hazards relating to eye protection. All employees and visitors entering an area or are performing a function which may expose them to hazards such as flying particles, hazardous substances, and harmful light or other rays of radiation, must wear eye protection.
Different forms of eye protection protect the eyes from a specific hazard. Recommendations as to the type of eye protection required in a specific area should be identified.
1) Spectacle-type safety glasses should be provided to persons requiring frontal protection. Frames and lenses of the spectacle-type safety glasses should meet federal standards.
2) Safety goggles should be provided to persons requiring a full seal-tight protection around the eyes.
3) Face shields should be provided to persons requiring eye and face protection against splashing acids, hot liquids, or even flames.
4) Filter lenses should be provided to persons requiring protection against harmful light and other rays of radiation such as the arc of welding.
5) Temporary eye shields will be provided to persons visiting a designated eye protection area.
All safety glasses, goggles, or face shields should be provided by the employer.
Appropriate eye protection should be provided for use of personnel involved in eye hazard areas. These should be issued to employees and visitors and recorded. For visitors the safety glasses should be returned.
Procedures in with eye protection concerns can be written to include the following:
Procedure 1: All persons shall wear properly fitted federal approved, or equivalent, goggles, force shields or other approved eye protection when engaged in work where there may be a hazard from any materials that may injure or irritate the eyes.
Procedure 2: All sources of intense heat or infra-red radiation shall be shielded as near the source as possible, by heat absorbing screens, water screens, or other suitable devices to prevent such radiation entering the eyes of employees not wearing goggles or eye shields.
Procedure 3: Where any person is exposed to emissions of ultraviolet radiation between 180 nm and 400 nm UV absorbing goggles, spectacles or face shields shall be worn and the exposure to the person shall not exceed the threshold limit value for UV radiation.
Procedure 4: Where deemed necessary by an Officer of the company, or where prescribed under the Regulations, approved safety glasses or goggles shall be worn.
By introducing these simple precautions into the workplace, all employees and visitors will be safe from eye injuries. Another piece of equipment to consider is an eye washing station. This can be located near the most prone area for eye injury in the workplace.
Share This Article
Rating: Not yet rated Next Article - Health And Safety Is Most Likely To Be Outsourced and Previous Article - Boost Your Business with an eBay Store
About the Author
Brent Bowlin is a health and safety researcher who has helped businesses in implementing safety programs. For help contact him at abbsafetynet@gmail.com or go to www.safetysuppliescanada.com for a customizable safety manual and for safety supplies, they deliver anywhere.For updated information on Business please visit this site.
Comments
No comments posted.Add Comment
Popular Articles about: Small Business
1: Physical Properties Of Acrylic2: Store Fixtures on Floor
3: Three core Internet marketing strategies for small business...
4: Chemical Properties Of Acrylic
5: Quick guide to starting a franchise
6: The State of Texas and Business
7: Why You May Not Be Getting What You Want Out Of Your Internet Marketing Business
8: How to Display Products
9: Lighting Fixtures For Retail Shops
10: How To Make The Most Of Your Passport To Wealth Internet Home Business
11: Acrylic Paints Dimensions
12: What Are Store Fixtures?
13: Trade Displays
14: Make Money Selling Wholesale Products on eBay
15: Party Your Way Out of the Mortgage Doldrums
16: Approaches in Satellite Radio
17: Store fixtures Divisions
18: What To Avoid When Starting Your Home Business Program
19: Display Fixture Tips
20: Receivers Used In Satellite Radio
21: Display Fixture Information
22: Keeping Your Tanning Salon Safe
23: The Issue Of Safety For Your Coffee Shop
24: Used Cubes And Office Furniture Provide Great Value
25: PAM in Satellite Radio
26: Metallic Store Fixtures
27: Channels Of XM Radios
28: Promotional Items Of Acrylic
29: Recycling Of Acrylic
30: Pulse Modulation In Satellite Radio